Contact Us
TEL: +86-577-65008706
E-mail: sales@rasongsheng.com
Address: No.2, Jingye Road, Economic Development Zone, Ruian, Zhejiang, China
Home > Knowledge > Content
Shrink film machine process
Oct 08, 2018

1, first set the heating time for the machine

2. After pressing the manual or automatic button, the electromagnetic output of the rack cylinder solenoid pushes the gear, and the gear drives the chain. At this time, the rear position of the rack cylinder is disconnected. When the rack cylinder runs to the top dead center, the front position of the rack cylinder is close to the switch, and the oven cylinder solenoid valve is electrically output.

3. When the oven cylinder runs to the top dead center, the timer starts to delay and the rack cylinder solenoid valve is de-energized.

4. At the end of the time, the oven cylinder solenoid valve is de-energized.

5. Decide whether to proceed to the next workflow according to the working mode flag.


Previous: The purpose of the bag making machine

Next: Introduction to shrink film machine