Contact Us
TEL: +86-577-65008706
E-mail: sales@rasongsheng.com
Address: No.2, Jingye Road, Economic Development Zone, Ruian, Zhejiang, China
Home > Knowledge > Content
Bag making machine cutting system
Oct 08, 2018

The cutting system consists of a cutter, a length adjuster, an overrunning clutch, and wire bonding adjustment.

1. Cutter: It is the most important part of the system. It adopts a movable knife and a sliding guide. The floating mechanism is pressed by the spring, and the upper and lower knives can be adjusted. There is an adjustment screw, which can be used to adjust the tightness of the cutter, which can well exclude the difficult material cutting phenomenon.

2. Bag length adjuster: The length of the bag is adjusted to control the length of the bag by changing the position of the link on the eccentric carriage, and the bag size is adjusted by tightening the hand wheel and the nut.

3. Overrunning clutch: The medium plastic overrunning clutch is an important part of the machine. Its quality and performance directly affect the error of the product length. However, in the course of use, due to the high working frequency, its life has a certain limit. If it is found that there is an error in the length of the bag during the production process (usually after half a year of continuous production), and the other faults cannot be solved, the clutch inspection and maintenance can be disassembled.


Previous: No Information

Next: Gravure printing of non-woven bags